Adhesives (WICTOR)

Adhesives play a crucial role in the footwear industry, revolutionizing how shoes are manufactured and enhancing their durability. WICTOR adhesives, known for their superior bonding strength and flexibility, have become a staple in the production of high-quality footwear. These adhesives ensure that shoes remain intact under various conditions, providing both manufacturers and consumers with reliable and long-lasting products.

In the competitive landscape of the footwear industry, the choice of adhesive can significantly impact the quality and performance of the final product. WICTOR adhesives offer an edge by providing excellent adhesion to various materials such as leather, rubber, and synthetic fabrics commonly used in shoe production. This versatility ensures that manufacturers can produce shoes that not only look great but also stand up to the rigors of daily wear and tear.

The use of WICTOR adhesives in the footwear industry also promotes sustainable manufacturing practices. These adhesives are designed to be environmentally friendly, reducing the footprint of the shoe production process. By opting for WICTOR adhesives, manufacturers can meet the increasing consumer demand for eco-friendly products while maintaining the high standards of quality and durability expected in the footwear industry.

Polychloroprene solvent-based adhesive for lasting of leather Uppers

Adhesives play a crucial role in the footwear industry, revolutionizing how shoes are manufactured and enhancing their durability. WICTOR adhesives, known for their superior bonding strength and flexibility, have become a staple in the production of high-quality footwear. These adhesives ensure that shoes remain intact under various conditions, providing both manufacturers and consumers with reliable and long-lasting products.

DUROC:	Adhesive  for the lasting of uppers to insoles. Light coloured and with medium Open time (~15’). Very high heat  resistance.
ULTRAPREN 70 TF:	Adhesive for leather soles  to uppers in leather or textile.  It is suitable also to the lasting of the upper in the insole. High green strength. High heat resistance. Short open time(~10’-20’).
ULTRAFIX:	General purpose industrial adhesive, suitable for bonding plastic laminates(e.g.: formica), carpet, foam, rubber, leather, synthetic leather, and hide to each other or to rigid materials. Good resistance to heat.
ULTRAPREN 712 S:	Adhesive for general bondings. It is suitable for leather, cork, rope, textile, leather, salpa, etc. It is often for cold lasting of uppers to insoles. Open time 30’ – 50’.

Solvent-based adhesive for upper assembling

ULTRAPREN 188:	Adhesive for soles in roughed SBR rubber, natural rubber, leather to uppers in leather or textile. Biocomponent. Open time= 30’ – 40’. Low viscosity.
ULTRAGUM 111 P:	Light non-staining adhesive with a natural rubber base for upper assembly. Very clear . Mid viscosity.
ULTRAPREN 793:	Adhesive for soles in roughed SBR rubber, natural rubber, leather to uppers in leather or textile. Light coloured. Biocomponent. Open time = 20’ -30’. High viscosity.

Adhesives for lining

ULTRAGUM 101 P:	Light non staining adhesive with a natural rubber base for temporary stitching.
ULTRAGUM 111 P:	Natural rubber adhesive with light color. Mid-high viscosity. Good trackiness on leather, natural materials and carton.
ULTRAPREN 333 T:	Adhesive for covering heels and wedges, for the applications of insoles, for lining. Very light coloured. Open time: 45′-60′.

Adhesives for Socks and Insole assembling

ULTRAPREN 731/7:	Single side adhesive for socks attaching and insoles assembling. Light colored
ULTRAPREN 188 M:	Economical grade adhesive for the production of insoles and masonite sheet for heel Mid and masonite sheet for heel Mid and shoe lasting.
ULTRAPREN 651 TRANSPARENT:	It’s a clear polychloroprene adhesive suitable for a wide variety of materials and it is particularly indicated for joining rubber to leather(SBR or TR)
ULTRAPREN 7FW:	Adhesive for the production of insoles, socks, leather garments. Very high stickiness. Medium viscosity.

Polyurethane adhesives for lasting of Leather Uppers

ULTRAPUR 312:	Adhesive for soles in leather, PU, PVC, SBR, and halogenated TR to     uppers in leather, textile or synthetic. Tough but elastic film. Low viscosity. Low reactivation temperature(~60 C)
ULTRAPUR 347/16:	Adhesive for soles in leather, PU, PVC, SBR, and halogenated TR to     uppers in leather, textile or synthetic. Tough but elastic film. Low viscosity. Low reactivation temperature(~60 C)
ULTRAPUR 340 MX:	Adhesive for soles in leather, PU, PVC, SBR, and halogenated TR to     uppers in leather, textile or synthetic. Tough but elastic film. Low viscosity. Low reactivation temperature (~60 C)
ULTRAPUR 841/R:	Strong adhesive for soles in leather, PU, PVC, SBR and halogenated TR, to uppers in leather textile or synthetic. It is also one component to be reactivated at about 70˚ C. Medium viscosity.
ULTRAPUR 30 AX:	Special pu Adhesive for automatic brush machine application on upper and with soles in leather, PU, PVC, SBR, and halogenated TR to uppers in leather, textile or synthetic. Low viscosity. Reactivation temperature (~60 C).
ULTRAPUR 230 LB:	Polyurethane solvent-based adhesive with very low reactivation temperature and possibility to be used at room temperature to bond sea slippers in PU or PVC to uppers in leather, textile or synthetic. Also known as cold bond pu

Solvent based adhesives for direct injection

ULTRAKITT 735 TR:	Adhesive mainly used in order to improve adhesion of thermoplastic rubber(TR) when it is injected on itself, on leather soles or on leather, splitted leather or textiles uppers.
ULTRAKITT 735 BLANK:	Quasi-Transparent very clear adhesive mainly used in order to improve adhesion of thermoplastic rubber(TR) when it is injected on itself, on leather soles or on leather, splitted leather or textiles uppers.
ULTRAKITT 705 PS:	Bicomponent adhesive for the injection  of TR rubber on itself, leather or salpa. Low viscosity.
ULTRAPUR 835:	Polyurethane bicomponent adhesive for PU injection on soles in halogenated rubber. Sometimes used as impregnating agent on leather. Low viscosity.

Crosslinker

DESMODUR RFE:	Bayer light crosslinker
HARTER FARBLOS:	Colourless hardner for polyurhetae adhesives.
DESMODUR DA:	Bayer colourless crosslinker for water-based adhesives.

Water-based adhesives

ULTRABOND SILVERTEX 508:	Natural latex with low viscosity for the bonding of the linings.
ULTRABOND SILVERTEX 330:	Bicomponent adhesive for soles in leather, PU, PVC, SBR and TR (previously treated) to uppers in leather, textile or synthetic. Medium viscosity. It can be used also by spray.
ULTRABOND SILVERTEX 3075:	Bicomponent adhesive for soles in leather, PU, PVC, SBR and TR (previously treated) to uppers in leather, textile or synthetic. High viscosity. It can be used also with machinery.
ULTRABOND SILVERTEX 2905:	One component adhesive with excellent green strength and high immediate heat resistance. It is suitable to the lasting of the uppers. To be applied by brush.
ULTRABOND SILVERTEX 238:	One component adhesive suitable to assembling and lining of various materials in the leather and lining jobs. To be applied by spray.
ULTRABOND SILVERTEX 2380:	One component adhesive suitable to assembling and lining of various materials in the leather and lining jobs. It is particularly used for the inserting of heel seat linings. To be applied by brush or roller coater.

Solvent-based primers

EVA PRIMER PE 15C:	Solvent based primer used to  increase adhesion of polyurethane and polychloroprene to  expanded EVA, microcellular EVA and P.E. heels preparation, favouring the wrapping operations. Specially for Non UV Process.
ULTRACLORT T-3:	One component chlorinating agent  for soles in TR rubbero or SBR.
ULTRAPUR 136 GLE:	Solvent based  synthetic resins primer used on heavy greased leather in order to increase adhesion  of polyurethane adhisinves.
ULTRAPUR 824:	Bicomponent  polyurethane primer used  as a first  coat on absorbent or greased leather. Must be used with the addition of a special hardener.
PRIMER 196 PB:	Impregnating agent for leather before bonding with a polyurethane adhesive.
ULTRAPUR PRIMER 257:	Specially used  for sulpa welt priming.

Cleaner – Thinner

ULTRASOLV 233:	Used for cleaning PVC, TR, Rubber or Polyurethane soles before bonding and  cleaner for synthetic uppers.
ULTRASOLV E 40:	Used for cleaning EVA & EVA Rubber Mixed soles before bonding cleaner for Non-Roughened Process.
ULTRASOLV POLISOL:	Used for cleaning roller coaters, spraying systems or brushes after the application of solvent based Polychloroprene and Polyurethane adhesives. Good as a thinner for polychlroroprene adhesives.
DILUENTE 006:	Suitable for the cleaning of soles made of expanded EVA, PVC or Polyurethane before bonding and for cleaning roller coaters, spraying systems or brushes after the application of solvent based adhesives in footwear market.
DILUENTE ULTRAPREN:	Thinner specifically designed for polychloroprene adhesive dilution employed in automatic rolling machines.